Isantya esiphezulu se-10mm se-laser sokumakisha ukukrola intloko ye-galvo yeskena
Iimbonakalo
1. Iingxolo eziphantsi, umgca ophezulu kunye nokuhamba okuphantsi
2. Uyilo lwemodyuli, ukufakwa lula kunye nokugcinwa
3. Ukuxhasa iindidi zeelensi ze-F-theta
4. Iyafumaneka kwi XY2-100
5. Ukusebenza kwexabiso eliphezulu
I-10mm galvo scanner inozinzo olusebenzayo olusebenzayo, ukuchaneka kokuma okuphezulu, isantya sokumakisha ngokukhawuleza, ikhono elinamandla lokuchasana nokuphazamiseka, ukusebenza ngokubanzi kwe-scanner kufikelele kwinqanaba elihamba phambili lamazwe ngamazwe kule ndawo.Iinzuzo zezi zilandelayo:
1.Yamkele i-photoelectric sensors
2.Umgca ofanelekileyo, ukukhukuliseka okuphantsi, isisombululo esiphezulu kunye nokuphinda ukubeka.
I-3.Uyilo oluchanekileyo lomthwalo wezibuko ze-10 mm, ukuchaneka okuphezulu kwendibano yemoto, isakhiwo esinengqiqo, i-coefficient encinci ye-static friction, kunye ne-zero offsets, zonke ziqinisekisa iimpawu eziguquguqukayo ezibalaseleyo zenkqubo yonke.
I-4.I-Drives enobuchule obuphezulu bokubona indawo kunye nesantya siphucule kakhulu ukusebenza kwempendulo eguquguqukayo kunye nesantya sokuskena senkqubo yonke.
I-5.Uyilo lwe-overload, i-over-current, kunye nokubuyisela umva ukhuseleko lokudibanisa, yenza inkqubo isebenze ngokuthembekileyo.
I-6.Inkqubo yonke yamkele ukulungelelaniswa koYilo lokuhambelana kwe-electromagnetic, kunye nomlinganiselo ophezulu wesignali ukuya kwingxolo kunye nekhono elinamandla lokuchasana nokuphazamiseka.
7.Le nkqubo yeskena yasombulula iingxaki eziqhelekileyo zokukhukuliseka kobushushu bemoto, ukuphazamiseka komqondiso, kunye ne-zero drift, njl.
Isicelo
I-laser yokumakishwa kwentloko ye-galvo scan ingasetyenziswa ngokubanzi kwi-laser yokumakisha, i-laser engraving, i-laser drilling, i-laser cut, i-micromachining, ubuhle bezonyango, i-image ye-ophthalmic, ukushicilelwa kwe-3D, njl.
Iiparamitha
| Umngxuma (mm) | 10 |
| Max.i-angle yokuskena | ±12.5° |
| Ixesha lokuphendula inyathelo elincinci (ms) | 0.22 |
| Ukujikeleza okujikelezayo (g*cm2·±10%) | 0.25 |
| Max.I-RMS yangoku (A/axis) | 25 |
| Incopho yangoku (A) | 15 |
| Zero drift (μRad./C) | ＜15 |
| Isikali sokukhukuliseka (ppm/C) | ＜50 |
| Umgca | ≥99.90% |
| Ukuphinda-phinda (μRad.) | ＜8 |
| Ukuqhuba ixesha elide kwiiyure ezisi-8 (mRad) | ＜0.5 |
| Ubushushu bokusebenza | 25℃±10℃ |
| Ubunzima | 1.2kgs |
| Imfuneko yamandla okufakwayo (DC) | ±15V @ 5A Max RMS |
